Historical Overview
of Rycraft Cookie Stamps
For over 50 years, thousands of satisfied Rycraft customers
have been developing treasured collections of Rycraft Cookie Stamps.
The colorful history of their development is outlined below.
STAGE I – 1965 - 1967
Eleanor Rycraft’s first attempts to carve cookie stamps probably occurred in 1966, described below in Robin’s 3/20/10 email to the man who sent the photo below right:
Dear Peter,
I looked at the stamps you purchased and was quite taken aback. I had forgotten these early beginnings. They were made by my folks probably in the mid 1960’s. The seed cleaning plant that dad owned had just burned down and finally dad didn’t have to go to work at a job he disliked greatly.
Mom had a stroke in 1963 or 1964 and couldn’t throw on the wheel anymore so these stamps were an easy way for her to decorate clay pieces, now mostly hand built. This was the beginning of our business.
The insurance money gave my folks a bit of time to think about the future. Helping mom with her new handicap, he carved tools out of broomstick wood and stamped the clay stamps you have to make designs. I still have all the wood tools that dad made. They were made to use in combination with other tools and they were all made with his pocket knife.
Mom and dad would be amazed to know some of their stamps turned up in Germany.
I am continually reminded of the blessing given to me and my family by my parents for a business that has supported us and many others over the last 40 some years. Great to hear from you and hope all is going well. My best to you,
Robin
Eleanor sold her first stamps in 1967, and they were approximately the same size and shape as they are today. Although Rycraft has produced several shapes of stamps over the years, all but the current round shape were discontinued by 1991.
Pictured at right: Early stamps were sold glazed and unglazed, and were made of white, brown, gray and red terra cotta clays.
In 1966-1967, stamps were individually carved by Eleanor. She used several types of clay (white, dark brown, gray, and red terra cotta). No two stamps were alike.
Pictured top right: Examples of early pear designs. In 1967, no two stamps were carved alike.
Pictured bottom right: Examples of early acorn designs. Stamps were sold either unglazed or glazed with sky blue, white, yellow, or dark brown glaze.
STAGE II – 1968
Design masters were used for the first time to produce more than one stamp with the same design.
At right: Examples of early geometric designs sold. The round, square and heart shapes were evidently the only shapes made. Because they were carved individually, no two stamps were alike.
Carroll Rycraft invented special tools for carving the stamps, which was now being done by either Eleanor or Carroll.
Round, square, and star shapes were the only shapes made. They started putting holes in the handles for attaching a shortbread recipe booklet, tied on with a piece of twine.
STAGE III – 1969 - 1970
There were a total of nine different shapes of stamps: round, square, diamond, heart, ‘dogwood,’ 6-sided flower, hexagon, 5-pointed star, and 12-sided flower. Aqua, red and green glazes were used for the first time.
Top right photo: Examples of the ten shapes sold by Rycraft, from left to right:
Top Row – 12-sided flower, hexagon, round
Middle Row – diamond, “dogwood,” heart, square
Bottom Row – Easter egg, 6-sided flower, 5-pointed star.
Bottom right photo: Examples of some of the faces of the different shapes of stamps.
Right: Examples of the heart-shaped stamps in white clay and terra cotta clay.
STAGE IV – 1971
Some handles had markings on the tip: (1) a contrasting dot of glaze, or (2) a special “RC” mark imprinted on the tip. They stopped putting holes in the handles.
STAGE V – 1972 - 1976
All stamp shapes except round and square were discontinued after 1971 with the exception of an Easter-egg-shaped stamp which was made in 1975 and 1976 only. White clay was no longer used. One of the last designs carved by Carroll Rycraft was the first annual Collector’s Dated Christmas Stamp.
STAGE VI – 1977 - 1991
Round and square were the only shapes made. Red terra cotta clay was now used exclusively.
Right top photo: In 1981 Robin started carving new designs, and his wife Rachelle also carved three designs.
Right bottom photo: Robin sold these Christmas ornaments for a couple of years, but we had no examples of them until a customer sent this photo to us in a letter.
STAGE VII – 1992 to date
Round was the only shape made. They changed to leadless glazes in 1997. And in 1998, Joe Patterson, and later Dan White, joined Robin Rycraft in carving designs until 2006 when Robin began doing all the carving again.
In 2009 the square cookie stamp was re-introduced due to popular demand.
A Rycraft 8-stamp home
display board (discontinued)
